-
Hey,
hat irgendjemand Erfahrungen bei der Umsetzung eines headless clients mit einem Pi Zero und einem Respeaker 2Mic Hat? Ich bekomme Sepia zwar grundsätzlich zum Laufen, allerdings ist das Teil u…
-
Hey all,
I'm having an issue using OVOS with the ReSpeaker 2 mic hat. When I try the installer file, it works for a bit, until it gets to 'scan i2c bus for hardware auto-detection' - fail, unable …
-
**Describe the bug**
Due to a mismatch in the BCM2835_ISP_BASE between libcamera and kernel 5.12.y and kernel 5.13.y, libcamera will not work with rpi unless its v4l2-controls.h is also modified to m…
-
I have tried 2 example codes,
1. Example_06_3D_Enhance.ino -- it only gave me the output " 3D ENHANCE ENABLED" "3D ENHANCE DISABLED"
2. Example_08_I2S_Passthrough.ino -- no output
as per both …
-
To support our port of _Yamaha OPL3 FM Audio Synth_ (aka "**SoundBlasterPro**"), we need digital audio output based on I2S protocol.
While the headphones are a bare minimum, a 1+ watt speaker woul…
-
Hi, if I follow your tutorial for Raspberry Pi Zero 2 W and Respeak 2 Mic Pi Hat than I can't go further than the arecord test cause I can't access the Hat Microphone to record the test.wav. Arecord -…
-
Hi Franz,
all the modules have been inserted , but seems not works. there is no controlC0,seq etc under /dev/snd/ ,below are some information ,thanks very much if you can help
root@OpenWrt:~# dmesg
..…
-
I am using the Seeed Respeaker 4 mic hat: https://files.seeedstudio.com/wiki/ReSpeaker-4-Mic-Array-for-Raspberry-Pi/img/connect2.jpg
The SD card died in my Pi3b voice assistant so I thought I'd tr…
-
**Describe the bug**
Compiled SOF successfully with XCC toolchain RJ2024.3 from Cadence.
When trying to run an IIR test I get a `load/store error` on DSP:
```
*** Booting Zephyr OS build v3.7.0-rc…
-
**Is your feature request related to a problem? Please describe.**
Move to IPC4 for all i.MX platform
- [ ] imx8m (i.MX8MP)
- [ ] imx8 (i.MX8QM)
- [ ] imx8x (i.MX8QXP)
- [ ] 8ulp (i.MX8ULP)
…