-
Esp32-2432s028r
XTOUCH ver 0.9.58
**Describe the bug**
When trying to change temps, Cannot do so. It consistently refreshes?
**To Reproduce**
Boot esp32
Connect to printer
Select a t…
-
## Feature Description
The sleep time setting on a slider is 5 minutes minimum. Minimum of 1 minute would be better.
## Justification
Power saving in order to let the device be battery operated.
…
-
## Feature Description
it would be nice if we could change that xtouch logo to something else, like the printer we have
## Justification
that would personalize the screen to specific printer
…
-
## Feature Description
The ability to find and print .GCODE from the printer SD card.
## Justification
This feature is already available on the existing LCD screen on P1P and P1S, and is the …
-
Hi,
I'm about to receive my p1s and preparing an order to buy all the stuff.
About the temp sensor, if I understood correctly, the sensor will be plugged to the x touch screen. That means the scree…
-
To start off, I am really enjoying ReaLearn, it’s a great plugin. Thank you.
Quite often I cannot get as good acceleration from my encoders in a relative mode (compared to absolute).
This is the c…
-
**Describe the bug**
I bought chamber sensor B and it arrived this morning. I printed the case beforehand then realized the case didn't fit. I wired it up anyway according to the guide and tried turn…
-
As the JST connector on the ESP32 is a 4-pin connector, but the temperature sensor only has 3 pins it would be helpful to get some information about the wiring how it gets connected. Thanks!
-
@equilet @EdmundCampion
I think the 158B wrappers are ready to be o.io instead of cnmat.o.io now.
This also makes me wonder if we should move the o.io wrappers into the odot repository?
Or ma…
-