-
FrSky X18 with Ethos 1.4.5
Happymodel ES24TX Slim Pro with ELRS 3.1.2
1. Maximum range for the `Rx Curr` sensor is only 10.0A and can not be set higher.
2. Maximum range for the `RX Cons` sensor …
-
Hi everyone. I am new in fpv and i own a new x18s . Everything is updated to latest and is ok. I try to copy the lua script to the sd card but is not working. Only if i copy on the internal memory of…
-
### Describe the bug
MATEKF722HD board with DPS310 .
Betaflight 4.3 recognize the Baro without issue , Betaflight 4.4 latest official release does not.
BF 4.4 Core firmware detect Baro and …
-
Added GPS
> Version = 1.0.1
> Function Pin Change entering XXX=yyy (yyy=255 to disable)
> Primary channels input = 255 (PRI = 5, 9, 21, 25)
> Secondary channels in…
-
### Describe the bug
When I use automatic detection to flash my stack, betaflight does not find any official target of my version whereas a few weeks ago the version was offered to me
![Capture](htt…
-
Arming disabled flags: NAV HWFAIL RX CLI
INAV Not Arming - "CLI = VTX: not detected"
Looking for a solution to this
-
### Description
In the release notes of Django 4.0 A possible requirement is to change/add CRSF_TRUSTED_ORIGINS in the project settings.
Is this also something you want to warn users about that use …
-
Hi,
I tested iBus-protocol successful with V1, V2 and GPS (uBlox and CASIC), but can't get BMS280 to be recognized by EdgeTX
- Baro-data is not recognized after discovering sensors.
- V1-data i…
-
## Current Behavior
https://github.com/iNavFlight/inav/assets/89179705/609ea551-014a-4696-8a87-0e0c0a0c2694
## Steps to Reproduce
1.I am using firmware version 6.1.1 of inav
2.After the power-…
-
Hi,
I have started a comparison of the telemetry sensors between Ethos and OpenTX. Thereby I noticed some errors in Ethos. Source of the sensors is a Flight Control (Matek F405-Wing) with Arduplane…