-
I found this issue in AFR, which is copied from esp-idf:
https://github.com/espressif/esp-idf/blob/release/v3.3/components/driver/ledc.c#L443
This is output with additional logging:
```
ESP_…
-
Core XY printer, Marlin development downloaded 02/03/15. Arduino 1.05
# define Z_RAISE_BEFORE_PROBING 5
Start printer (0,0,0). Z+10(pronterface), Z+10 (0,0,20), G28 XY, G29 ...and marlin drops Z rath…
-
### Did you test the latest `bugfix-2.0.x` code?
No, but I will test it now!
### Bug Description
I'm new to Marlin, and relatively new to 3d printing. This is my first printer, Ender-3 with 4.2.2 M…
-
Hello,
I am trying to get your Arduino_GFX library up and running with HWSPI on my UNO plus ST7735 greentab display.
Everything works fine with SWSPI. I do have a speed issue on my SPI bus, so I …
-
Request of the laser section with the possibility of associating a pin (44) via the display where I have the possibility to turn off/on the laser and adjust the intensity in pwm (0-255) and display t…
-
There should be an API to set the APP core freq of the nRF5340.
Currently, the method of changing the core freq is direct register writes.
This API should:
- Change the clock between 64 and 128…
-
Hi Dave,
Maybe a stupid question, but does the ATOMBusMonitor option compile OK on your platforms?
I haven't spent a lot of time looking at it, but I did a quick try on my port and got errors ab…
-
### Describe the bug
ELRS SPI RX will not bind to TX, works fine in 4.3.1.
### To Reproduce
- Fresh load 4.3.2
- go to receiver tab and enable SPI RX
- set provider to EXPRESSLRS
- Enable …
-
Adding support for ESP32-S3 chipset.
_Please specify what's needed and tag issues which will be solved by this._
**Update:**
- development branch [esp32-s3-support](https://github.com/espressif…
-
**Describe the bug**
ESP32 S3 compiles error in Platformio.
`.pio/libdeps/esp32-s3-devkitc-1/Simple FOC/src/current_sense/hardware_specific/esp32/esp32_adc_driver.cpp:31:23: error: 'SENS_SAR_START_F…