-
`Scancode.Of` (and furthermore, `InputKeyTranslator.CurrentPlatformScancode`) should work for various keyboard layouts, not just QWERTY. Do not panic, however. Most of them seem to be based on AZERTY,…
-
![image](https://cloud.githubusercontent.com/assets/327019/5773981/b31f1e4c-9da3-11e4-8775-95818dafc431.png)
My production code running node v0.10.30 long time. Recently, we upgrade one of servers to…
-
I think the fix from #10 is catching the wrong JSONDecodeError, I'm seeing requests.exceptions.JSONDecodeError being raised, code is catching json.JSONDecodeError:
```
File "/home/pi/github/Ther…
-
### The problem
Honeywell thermostats no longer showing.
### What version of Home Assistant Core has the issue?
2023.2
### What was the last working version of Home Assistant Core?
2023…
-
I want to set the heat source so that if the temperature differential is more than one degree the heat source is gas. Otherwise the heat source is heat pump.
Is this possible through infinitude an…
-
### Is your problem within Home Assistant (Core or Z-Wave JS Integration)?
NO, my problem is NOT within Home Assistant or the ZWave JS integration
### Is your problem within Z-Wave JS UI (former…
-
Lors du démarrage de Mobicop sur un Samsung Xcover 4, la bibliothèque démarre en mode scanner, bien que cet appareil ne devrait pas prendre en charge ce mode.
**Comportement attendu :**
L'applicat…
-
### The problem
Using the UI, I cannot set my temperature anymore for a Qubino Zwave ZMNHIA thermostat (non zw+, FW: v1.12)
this module only have one HVAC_Mode (off / heat_cool), but only ONE setpoi…
-
I'v got an BIGTREETECH SKR 1.4 Turbo connected to the TFT 35 V2 using the RS232 Port on the TFT and the TFT port on the board. Updated the screens firmware, set the baudrate @ 250000 on both Marlin (o…
-
First off, thank you for much for the recent changes in 2023.2.0 on with this new code. The Honeywell integration has been one of the most problematic/frustrating for me in the past and I really appr…