-
The following instructions are a memory log from my successful attempt today to get the LEDs of the Ugreen NASync DXP6800 Pro running poperly on TrueNAS Scale.
I hope I haven't forgotten anything, …
-
The right back panel network LED is off, but network works!
![PXL_20220508_100321394](https://user-images.githubusercontent.com/21226229/167310478-a0561870-b87a-49da-ae4e-81213013582e.jpg)
The…
-
## Current Behavior
The 2 led on the left side are showing "GPS not fixed" status.
The 6 led on the right are in "Color" mode, and RED color number 2 is chosen.
![IMG_20240112_154809__01](https:/…
-
### Describe the bug
I added an Ubus object, which can be queried through the Ubus list
```
root@DataJar-D0F1:~# ubus -v list systemd.virtual_led_service
'systemd.virtual_led_service' @44c1359e
…
-
**Summary**
**User story**
The user story that has led to the need for this task, expressed in the format below.
_As a contributor,
_I would like I'd like to understand which files i need to update …
-
Hello!
I would like to be able to change the colour of the power led on the Horus X10S Express. I guess on other radios it will also be possible. I don't like the standard blue that is used when the …
-
Taking the commands from [this bug report](https://bugzilla.kernel.org/show_bug.cgi?id=216197), and changing the commands to use `hwC0D0` instead of `hwC0D0`, allows you to toggle the leds.
I would…
-
### What issue do you have? Please be as thorough and explicit as possible.
When I turn on these lights brightness is at 39%. Increasing brightness makes them go less bright.
This is happening wit…
-
### Question
Hello,
I am trying to build a remote system with a remote and a receiver (both esp32-C6 or H2).
On this system, for safety reasons, the user has to press a button while he wants t…
-
After update to 1.9.10 Bazecor and 1.2.6 Firmware
**Time before LEDs turn off** _does not work_ on Dygma defy.
LED's always glow.