-
I would like to tree like the image below, but my issue is connecting to the root tree (yellow color) from the left to it, but only 1 node success. What essential if the graph allows adding from many …
-
BigTreeTech TFT TouchScreen Touchscreen mode possible? Or add that mode please.
When i want to run the BT TFT with my Octopus v1.1 and Klipper i only find to use that with
```
[display]
lcd_ty…
-
Currently running Klipper on Ender 3 V3 SE. Recently updated, and needed to update the Exapnder board. When I try to update it, I get the following error:
biqu@BTT-CB1:~/klipper$ make clean
biqu@B…
-
Hi, Im trying to use the ps_on pins with klipper whit the SKR Octopus 1.1, but it doesnt work.
I am using PE11 from J36 to power a Relay, but I have not been successful.
This is my config on klipper…
-
Hi,
The board gives random beeps when installed inside my Ender 5 plus case.
BTT mode you do not see anything but in marlin mode i see it is also really doing something.
I see that it is puching …
-
I have a skr 3 with tmc2209 driver in uart mode and sensorless homing and all works fine, so i decided to upgrade my drivers to ez2209 with ez driver connectors for better heat dissipation and afte…
-
I have installed the 3.1 Bltouch onto an skr mini e3 v2/TFT ender 3 pro. I flashed the correct firmware from https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V2.0 according …
-
Hi, I have several problems going on with the Octopus v1.1 board:
1. When I try to restart the board with a new firmware.bin by pressing the restart button, nothing happens.
- I tried powering u…
-
Its possíbel to on future se what we are printing?
Thanks
-
Manta M8P refuses to go into DFU mode.
The board is powered via USB with the CB connected. I can SSH to the CB1.
**I have tried:**
- Hold BOOT, Click RESET (the run 'lsusb'), nothing.
- Remo…