-
Hi
I'm using NimBLE-Arduino 1.4.1 with arduino-esp32 core 2.x.x and it works great, but now I'm trying to upgrade to arduino-esp32 core 3.x.x and when I call the ``NimBLEClient::connect()`` method I …
-
I've successfully flashed my code for the SSD1309 display, but it's showing irregularities in its output, as depicted in the provided image.
I'm using ESP32-S3-MINI-1
![Display_image](https://gi…
-
I'm using a standard [ESP32] board to connect Daikin's S21 (ftka20bv1h) with default config mentioned here: https://github.com/joshbenner/esphome-daikin-s21#configuration-example
but keep show the…
-
Invalid params
esp32-s3-devkitc-1
ESP-IDF
-
The Waveshare ESP32-S3-Zero board (https://github.com/adafruit/circuitpython/pull/8468) uses a Neopixel with different color order than RGB as the status LED, which means that it blinks green on error…
-
Hi Please add some more details which dev board are you using.
Also specify the status of the project, is it working with esp32_s3 , or its work in progress.
Thanks
-
Hi @grassjelly,
Currently I am building an AMR based on your Linorobot2 setup including the hardware. I found it is quite hard for me to find teensy in my locations. I did some change of the linorobo…
-
I cannot flash wled to a wemos S2 mini with the web installer (esp8266 and esp32 are ok)
I have also tried the alternative bootloader without success.
I have been holding the board in bootloader mod…
-
## Environment
- Development Kit: Custom Card,
- Kit version
- Module or chip used: ESP32-WROOM-32E
- IDF version:v4.4-dev-2915-gc8aab00fd
- Build System:idf.py
- Compiler version:xtens…
-
Any time I try to set up UART2 with dmx_driver_install the program crashes. I am trying to setup all 3 UART ports with a DMX output, I do not need RX or the enable pin. I have tried setting up UART2 o…