-
Grbl_ESP32 Ver 1.1f Date 20200319
I am using an ESPDuino, CNC Shield and ESP32_Grbl successfully with an MPCNC, Grblgru and 4 axes. Both USB and BT work well.
I soldered wires to the ESPDuino pins 1…
-
Hi,
I was told that this issue might be best to report here.
https://openbuilds.com/threads/wifi-hard-limit-error.20157/#post-132866
I'm new as a CNC hobbyist. I have purchased a custom versio…
-
I followed the instructions given in "compiling girbalHAL section" to compile the driver for 6-axis. but after downlading biard, the driver is still 3 axis.
I edited the cnc3040 file for needs, and …
-
### Controller Board
VEVOR 2500 mW CNC 3018 Pro-M Machine, don't know Controller Board-Modell
![grafik](https://github.com/bdring/FluidNC/assets/23479553/a78ce623-8c1c-438b-842f-7554767eccca)
…
-
### Version
2.0.14
### Hardware / Firmware
GRBL 1.1
### What happened
UGS latest version
with GRBL1.1h at CNC Shield V4 Nano works fine,
but no Potis reaktions for Override Feed and Speed at …
-
Due to new setup wizard and settings page translation and coming status page - some German translations are missing
Help is more than welcome
-
### The problem
Using the following software update strategy, weird things happen if you do not include a version update for your plugin with any commits you push to the identified origin repo/bran…
-
### Controller Board
Sculpfun S30 Pro Max 20w Laser MKS DLC32
This is an image of the exact board in use
https://diode-laser-wiki.com/wp-content/uploads/2023/03/S30-Pinout-1024x787.png
### M…
-
### Version
2.0.14
### Hardware / Firmware
GRBL 0.9
### What happened
i did everybut thing well (wiring the machine,setting the grbl code on the arduino board ) but when i open the ugs and i conn…
-
### Summary Description
Hi dear, with latest release gcode board not working anymore.
The only command that send and return a response in controller panel is the clear alarm button, other commands o…