-
Currently all PDU transmitters require crew with the ConverterSkill to function. This means each remote MPU and drill vessel needs its own separate power supply even if they're only 5 meters apart.
…
jd284 updated
6 years ago
-
Hi Tisham,
As discussed it would be of great value to add comprehensive support to expand the isolated SPI mezzanine board to support the additional pins on the ESP32 based (Wemos) Mini D1 modules.…
-
I had an installation with an inverter conencted through ethernet and meter conected through modbus to inverter and have been getting readings and controlling the inverter through modbus tcp without …
-
### Is your feature request related to a problem? Please describe.
_No response_
### Describe the solution you'd like
It would be great if someone could add support for Renogy MPPTs, just like the …
-
I'm using a Kauf Plug as a power meter for my desk, which includes my computer. Twice in the past few months my power has suddenly glitched, computer restarts, chaos ensues, etc. Today I figured out t…
-
Is there any chance to intigrate the energy manager into the module, so you could get readings for the photovoltaik. The goal is then to create automations based on this data? :)
-
thanks for the code, it helped me to spot some strange electricity usage in my house.
any idea when the sleep mode will be implemented ?
my installation had to run on a power bank as there is no so…
-
développement du fw de calibration suivant les specs qui suit #264
f4bjh updated
2 years ago
-
i have 2 board spider 1.1
One of this work well but other don't work.
My board has many problems:
1. When i flash usb firmware . Pi not recorgnize.
2. When i flash uart mod. Pi can connect it. B…
-
I do like to test the payload from the water-/gas-meter (if the radio does send the correct payload and if the correct header is sent). Add cli option --longheaders which allows to verify all content …