-
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
pip
**ESP (ESP32/ESP8266, Board/Sonoff):**
Sonoff S20, Nodemcuv2 (esp8266)
**ESPHome version (latest production, beta, dev b…
ghost updated
2 years ago
-
### PROBLEM DESCRIPTION
After upgrading to 7.1.2.2. my lightbulb socket is stuck in 7.1.2.2. minimal.
### REQUESTED INFORMATION
- [x] Read the [Contributing Guide and Policy](https://git…
-
@gemu2015
Some discussion on Discord re: 3-phase power monitoring with Tasmota. In particular, using multiple inexpensive PZEM-004T modules. I suggested that perhaps the smart meter interface you …
-
### Problem description
the device connects to ZHA but no power monitoring is possible or anything else
![grc-screenshot(3)](https://github.com/zigpy/zha-device-handlers/assets/83129136/2582a4b6-3df…
-
### What happened?
Devices 4 pc. (RTV https://www.zigbee2mqtt.io/devices/GS361A-H04.html ) disappearing from Device list. after 15-20 minutes. Before they worked without issues.
### What did you …
-
**Is your feature request related to a problem? Please describe.**
After joining the Zigbee plugs, TS011F by _TZ3000_okaz9tjs to ZHA the numbers being pulled are incorrect, yet when using adding the …
-
### What happened?
With v1.35.0/1.35.1, I've been receiving the `sendZclFrameToEndpointInternal error`. Unlike similar issue reports, mine was not occurring due to my config pointing at the wrong dev…
-
My goal was to put both BMS I have (JK BMS HW v11 & v10) for a 16s setup over MQTT using the esphome-jk-bms tool.
To recap:
- 1 x ESP32 for JK BMS Battery 01 (jk-bms-bat01)
- 1 x ESP32 for JK BMS…
-
### Bug description
When integrating the AduroSmart scene switch in zha the scene switches do not work.
The on/off switch works fine, but the other 3 (scene) switches do not work. Well sort of whe…
-
Sometimes switching via Sonoff LAN does not work (e.g. for Sonoff m5 switches), but the status is well displayed. In this case only Sonoff integration reload helps. Does this about every 4-5 days.
I …