-
I've tried using dark reader but the board is as bright as it could be. : (
Also, it would be cool to have a grey/ [light] solarized themed board.
-
Is it possible to user network interface on this devboard?
From micropython docs:
```
To use this module, a MicroPython variant/build with network capabilities must be installed.
```
I don't see…
-
### The problem
I have a black and white 2.9in waveshare epaper display that I would like to use within ESPHome, however I've ran into an issue.
When I tried setting the model to either `2.9in` o…
-
```
It just a question.
Motor 1 channel have some voltage, even all PID & PWN% are 0.
I tried so many firmware version, also the same.
motor 2 channel is fine and I can configure correctly.
But I ha…
-
Hi,
I'm using your breakout board as both a cnc controller and sometimes switch to laser mode for etching.
The etching itself works fine, but i'm having issues with the laser constantly enabled or…
-
@embest-tech said:
> We found the board goes to uboot mode when the board start without serial cables, the reason is that U46 2# pin input is floating , even if we had a pull-up resistor(R173) in t…
-
**Description**:
The game should continuously ask the player for their desired piece movement without actually updating the chessboard.The goal is to keep asking players for their moves until they de…
-
### Description
Tft display stop responding after touch object spi begins, touch works perfectly but stops tft.
### Steps To Reproduce Problem
Please give detailed instructions needed for anyone …
-
First of all, thank you for the amazing idea and putting it online
I tried running this on two different Lilygo T Display S3 but unfortunately it crashes after a few milliseconds and the microcontr…
-
I have a BeagleBone Black board and I'm using the below-mentioned image file.
https://debian.beagleboard.org/images/bone-debian-10.3-iot-armhf-2020-04-06-4gb.img.xz
###############################…