-
Hi, we bought your book at Maker Faire (thanks for signing it!)
The code here has an issue that we needed to fix
For the strobe delay, you declare:
long strobe_delay = 0;
but in
void loop() {
st…
-
Worked through a problem I had and found that the commands passed to Virtual Tasmota via MQTT must be lower case.
cmnd/bedroomlight/power1 ON (works)
cmnd/bedroomlight/POWER1 ON (Doesn't)
It al…
-
I notice that when icons are enabled, if you focus away from the stack, the inactive stack icons lose their background colour and become completely transparent.
This looks fine when icons are enabl…
-
When manually dimming a Heatit Z-dim dimmer using the dimming wheel z-wave goes in to a constant loop. Where it seems to me like target value is never met.
> z2m:Zwave zwave node 32: changed: 38-1-…
-
So I've been testing things out on my Raspberry Pi 3B & it would appear it makes no difference what Linux distro I use, the FPS is always under 5 fps... Can't make it go any higher, I've even tried Fe…
ghost updated
6 years ago
-
I'm new to this program, so sorry if there's a way to do something already that I've suggested!
---
##### Drag & Drop Text:
The ability to drag and drop selected text to move it around easier
---
#…
-
**Describe the bug**
If you set up the virtual console with a cuelist and a submaster inside a solo frame, the submaster does not work until the workspace is saved, QLC+ is restarted and the workspac…
-
If trying to look at say, whether marker X is present or absent, scaling each image individually is going to make it pretty hard to tell that (unless you notice background increases and/or there are s…
-
I'm unable to get the example ble central code working with the example ble peripheral code. I'm able to successfully scan and connect to the peripheral from the central device (both iPhones) but I am…
-
### What happened?
The LED's blink randomly. As per #8072 the device seems to fall off network and re announce itself. I've removed and repaired it today and it is still happening. There are no en…