-
Hi Please add some more details which dev board are you using.
Also specify the status of the project, is it working with esp32_s3 , or its work in progress.
Thanks
-
Hello,
I purchased an esp32-s3-korvo1 v5.0.
I am able to make it running with esp-adf platform with all assist features.
Now, I would like to implement a media player function but I am not ab…
-
Hello,
I make various pcb boards and I have a proposal to make a professional board for this project. I wanted to add MQTT broker control over ETHERNET, is it possible to rewrite the software under …
-
我想基于idf库进行开发,而不是micropy或arduino,楼主是否考虑开源呢?
-
I trying Quectel EC25 and ESP32-S3 with USB connection.
I have a successful PPP connection within the 4g_hotspot example with the config shown below.
CONFIG_BRIDGE_MODEM_USB_VID=0x2C7C
CONFIG_BRI…
-
When the internal USB of esp32-s2, esp32-s3 and esp32-c3 is used to output the REPL information, the internal REPL function cannot work normally.
At present, most micropython firmware of esp32-s2, …
-
### Board
LilyGo T-Dongle-S3
### Device Description
ESP32-S3
### Hardware Configuration
No
### Version
v2.0.11
### IDE Name
Arduino IDE & Platform IO
### Operating System
all
### Flash fre…
-
**Is your feature request related to a problem? Please describe.**
If you try to use the generated project eez_lvgl_demo (with eez studio 0.13.0) in Arduino 2.3.2 with ESP32-S3 (Espressif 2.0.11, lat…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### The problem
Hi all,
I try to set up an Esp32cam but always run in the error above. The module I am using is this one (although from another vendor but the pin outs are the same): https://micr…