-
Using current build on a good old NAZE with IBUS the stick inputs stuck at 1500.
Switches and VRs are still working.
Problem was introduced in BF build 1168. see https://github.com/betaflight/betafl…
-
Can I disable or adjust when will tx beep? Right now when tx battery drops by 0.01V there is a beep which is higly annoying. Might be fixed in newest qba667 version, havent tried yet.
Binding. That…
-
i saw a strange behavior in 3.2 not present in 3.1.7 and before.
if i activate fail-safe from a switch when the quad is armed , the quad disarm , throttle set to 885 all is normal.
but in betaflig…
-
I'm using Matek FC F405 AIO and I'm experiencing some yaw twitches and uncontrolled yaw spins.
After reverting back to 3.1.7, the problem seems to go away. I've tried this at 8k/8k, 8k/4k, dshot600,…
-
i have a flysky fs i6 transmitter with fsia6 receiver i think i'm using the correct channel map but this is the result.
https://youtu.be/YAmpnTkA4Js
-
Data on the receiver display for a fraction of a second during startup, then do not.
I corrected as beelow and compiled. Now is good.
Inav: 1.4 (file ibus.c in 1.4 and 1.5.1 is the same)
Target: SP…
hali9 updated
7 years ago
-
When I read the models from my Frsky X7 the Multi Radio Modul protocol "Flysky AFHDS2A" is lost. All the other are there
-
Hello sir ,
I am using naze 32 rev 5 10dof FC and 12A ESC BL-heli with flysky 2.4GHz transmitter and receiver. my quad is showing corresponding values in the receiver tab of the clean flight going fr…
-
hydra updated
7 years ago
-
I used google translate.
==================
//Modify the channel order based on your TX: AETR, TAER, RETA...
//Examples: Flysky & DEVO is AETR, JR/Spektrum radio is TAER, Multiplex is AERT...
//De…