-
Hi, thanks again for adding the soc of the 2nd battery. The output for the 2nd battery doesn't contain the voltage and ampere, so the power use of the 2nd battery can't be calculated. Or is there an o…
-
Hi,developers
I conducted two measurements of the same FPGA architecture at low temperatures with power supply voltages of 0.7V and 0.8V, the value of vth0 was also changed to 0.3 in the 22pm process…
-
I'm not sure if some math is being preformed but when there is another inverter in the system and enphase is only part of the PV production, when I am exporting power back to grid, the consumption is …
-
After testing current consumption of the Pira Smart device, it seems that BLE + RTC are consuming ~569uA. Look for the options how to reduce power consumption of the BLE SoC - inside firmware especial…
-
**Describe the bug**
Firefox uses about 5 times more CPU time for showing Ividious page in listen than direct playback of the same file.
Brave uses about 3x times more CPU time.
**Steps to Reprod…
-
Thank you for your team's hard work on this project! I really appreciate the effort and dedication put into it. My name is Buqing, and I’ve been using COFFE for measuring power of bram in FPGA in prof…
-
Issue with PowerGeneration.md
The ratio of shulker models to numismatic generators seems to be off.
A single sulker model requires 512 RT/tick. As single numismatic dynamo with lapidary calibrat…
-
Hi,
I'm able to connect over HTTP but can't fetch actual data. Seems like an unhandled exception when parsing:
```
--- Logging error ---
Traceback (most recent call last):
File "/usr/lib/py…
-
Hello,
I have 2 smart energy meter, the first one has a firmware version 1.0.2 and the second is in 1.1.17.
The first one is working fine and I can get the current and power with tuyapower.
The s…
-
I want to control the TxPower in LoRaWAN mode,so i have few queries:
1. How to control the TXPower in LoRaWAN mode or is it directly controlled by LoRaWAN MAC???
2. Does the power control will over…