-
### Describe the bug
# BF 4.4.x (Blackbox recording not possible)
I tested FWversion up from 4.4 to 4.5 and every time I struggle with this error
![image](https://github.com/betaflight/betaflight…
-
Hello everyone,
I am trying to get AFSK (and later AX.25) running on my TTGO T-Beam (Hardware Revision 1.1). The LoRa Module is SX1278. I tried a lot but to make it simple and avoid other sources o…
-
Have a 22kw Generac (7043) with Evolution 2.0 Controller with MobileLink Wifi. The MobileLink is plugged into the 8 pin Port 1 connector on the controller. It appears the MobileLink uses pins 1,2,5…
-
I will continue the discussion here, until or if @keean can get Github to restore the thread. Luckily I still have a copy of the deleted #35 thread loaded, so I can copy and paste from it. If the orig…
-
### Describe the bug
Hey, when I plug my drone into my computer and connect it to the betaflight configurator, I can see that the GPS is working fine. I see a red/yellow icon on top and `GPS: connect…
-
### Type of request
Question
### OS version
Raspian / Debian
### wmbusmeters version
12 (bookworm)
### Your message goes here
I installed wmbusmeters on a RPI4 using an im871USB-Stick. I am abl…
-
### Describe the problem
Venus OS shows a Voltage High alarm everyday, I guess caused by the SOC reset feature.
Is this normal behavior or do I have wrong settings applied?
### Driver version
…
-
### Describe the bug
PiKVM uses the PCF8563 chip to implement a second hardware watchdog. When updating the kernel from 6.1.61 to 6.6.21 (d3d24545684c6b6637603e14443bbd67dae59413), the `/sys/class/rt…
-
### Dependencies
- [x] #274
### Overview
- The Information Architecture (IA) of the 'Search Bar feature' has been built based on CKAN benchmarking & the team's collaborative prioritisation work…
-
### Wiki Search Terms
fluidnc probe not working
See also issue #1180
### Controller Board
Issue exist with both 6x and Wemos D1 boards
### Machine Description
QueenAnt Pro w/HBS57H closed loo…
lytke updated
6 months ago