-
great job! thanks for sharing!
1. when i read the paper, i found the part of loop closure, but not found during the code . will it be released in future?
2. if add gps positon as prior factor, …
-
**Hi, I am trying to catch the real-time GPS L1 signal using RTL SDR as FrontEnd
I used the config file:**
[https://github.com/gnss-sdr/gnss-sdr/blob/next/conf/gnss-sdr_GPS_L1_rtlsdr_realtime.conf ]…
-
hello,
im using rs16 lidar and an imu. Im not looking for accuracy on this try but i want just integrate imu and lidar data so i want to see how it works.
when i run my launch file
~~~
…
-
Hello,
I fly with an Era80 with connection to xcsoar and i have the following problem;
The Era sends the barometric altitude with QNH correction, but the Xcsoar needs now the standard batometric alt…
-
- [x] Remove experimental flag
- [x] Remove feedback prompt on open
-
Hi all,
I purchased a Sparkfun AssetTracker development kit with MicroMod ESP32 add-on, GNSS antenna and so on.
I’m wondering how to find examples about using MQTT (I would use the onboard LTE mo…
-
### Is your feature request related to a problem? Please describe
when using older GPS modules or non-ublox (GK or MT) which only speak NMEA, and don't save settings, you have to configure the GPS …
-
Hi Kreeblah,
Is there something missing in your build doc? Although I am not well versed in GPS, I can navigate linux well enough to follow your (well written) build doc. I have followed each and e…
-
## Flow 1
- /context/ttl is not required for /on_action APIs
**/on_search**
- Either one of fixed (range) or split (frequency and times) timings should be provided in /bpp/providers/locations/t…
-
* https://community.st.com/s/question/0D53W00002GFgaLSAT/lsm6dsoxism330dhcx-real-sample-rate-lower-than-expected-in-fifo-mode
```
I am using the LSM6DSOX and ISM330DHCX in FIFO mode at 52 Hz or 20…