-
## Current Behavior
iflight blitz 1.6 vtx, doesnt change pwr lvls after 1&2. it may say that its on lvl 4 but the indicator lights only say lvl 2.
## Steps to Reproduce
1.install the …
-
## Current Behavior
There is no target for the Hobbywing XRotor F7 Flight Controller. Although the newer revisions of this Flight Controller don't come with a built in Barometer, there are empty …
-
## Current Behavior
## Steps to Reproduce
1. Start out with e.g. Raceband Ch5 Pwr 2, using the EDGETX ELRS VTX LUA, confirm OSD display correct CH: R5 : 2
2. Arm (Aux 1 / CH5)
3. Watch the…
MrMap updated
8 months ago
-
.
**PLEASE DELETE THE TEXT ABOVE AFTER READING AND UNDERSTANDING IT**
****
## Current Behavior
Radio Telemetry very slow (+- 12/15 seconds) in reporting/showing changes in plane orentatio…
-
## Current Behavior
MSP2 is currently not Supported over CRSF Telemetry so we cant use lua script to change pids with transmitter
## Desired Behavior
MSP2 is supported over CRSF Telemetry so that…
-
I am using MAMBA F405 MK2 V2,GYRO is ICM-42688-P, inav, version 6.1.1
I've tried all the gyroscopes that can be selected in the Configurator TAB (even the fake ones), but they don't work.
Can an…
-
## Current Behaviour
At he moment, the motors can be setup in the mixer and connected separately with a little rudder conrtol mixed into those two channels to provide a little differential thrust. Ho…
-
Matek F405 TE
Inav ...4.1 and above also tested with 5.1
With different units I have tried to calibrate accelerometer as always and in the first calibration register 4096 in all axis and trying ag…
-
I use this script very often at betaflight and it´s realy nice for PID Tuning an do so on.
For my funjet I need now inav for flying fixed wing and I convert the script that it alrady start and have n…
-
## Current Behavior
I use Matek H743 wlite board and inav 5.0 with linux
I can't connect board to inav but I can flash firmware
2022-08-22 @ 01:26:27 -- MSP connection successfully opened with ID…