-
Hi Folks,
Please can anyone advise what would be an appropriate sensor configuration and pin assignment to accept a 0-VCC input from this device connected as identified below? I can calibrate the MQT…
-
Hi,
This issue is not exactly regarding the zed-ros-wrapper but it's similar to that. While I use the ZED SDK in another ROS catkin workspace and when I try to initialize the variables under the ZE…
-
The following is the output of the PVS-Studio static code analyzer, I think we can probably ignore most of the warnings like ``Not all members of a class are initialized inside the constructor.``, but…
-
- use 500mA DC/DC
- add GND/I2C testpoints
- use RA IDC connector (optionally)
- make top layer SMA solder pads as narrow as pin - otherwise soldering of LEDs is difficult
- add PWR LEDs
-
While Modia works now on Julia 0.7 in general, one test fails:
```
...
Simulating model: ManyFilters
Number of equations: 200
Number of variables: 210
Number of continuous states: 10
... ModiaM…
-
Proposal to build a new EEM for RF power detection.
- Working name is "Rectifier" unless anyone cares to suggest something better
- Based on ADL5511 RMS detector or similar
- Inputs are SMAs, targe…
-
Dear Yajie.
I used pdnn for deep learning.
It works fine but when I used 'rectifiler' as activation function, it cause following error.
cPickle.dump(cfg, output, cPickle.HIGHEST_PROTOCOL)
cPickle.P…
-
I found two issues regarding the mlrMBO package.
1. MlrMBO seems not to support tuning the activation function. If I look at the [documentation](https://rdrr.io/cran/mlr/src/R/RLearner_regr_h2odee…
-
T. Kathirvalavakumar and S. J. Subavathi proposed an efficient weight initialization method using Cauchy's inequality to improve the convergence in single hidden layer feed forward neural networks. We…
-
**Actual Behaviour**
Experiments are implemented, but there are no demos on how we should perform the experiment. There are experiment docs with schematics and basic theory.
**Expected Behaviour…