-
### Answers checklist
- [X] I have read the documentation [ESP-AT Programming Guide](https://docs.espressif.com/projects/esp-at/en/latest/esp32/Compile_and_Develop/How_to_clone_project_and_compile_…
-
0. Could you send email to xianjun.jiao@ugent.be to introduce your self?
Done
**Issue description:**
Although, AP mode works great.
I observe a lot of bad-fcs messages in tcpdump when openwifi…
-
Hi,
I’m getting below error when I tried esp-hosted sdio with ESP-WROOM-32 and Raspberry Pi 4,
![IMG_9816](https://user-images.githubusercontent.com/71310803/143019782-535a1927-85aa-45b8-a2f2-fb…
-
Recently, I am reading the core code about the frame detection described in your repository called SDR_Matlab_OFDM_802.11a_2.4GHz. But some parameters setting confuse me. To be exact, i do not underst…
-
Hi, I have two models of 6700XT cards. I have an ASRock reference model and an XFX QICK 319 Ultra. Both cards have a memory junction temperature sensor which is displayed in HWiNFO v7.00, however Team…
-
Is your feature request related to a problem? Please describe.
- it will reduce the boilerplate code in the application, make application more efficient and reduce using Much memory.
- make ViewMo…
-
Create a driver for Rx redundancy check on CAN1.
Must be rising edge-triggered interrupt
Transceiver: TCAN1043HGDQ1
[Product page](https://www.ti.com/store/ti/en/p/product/?p=TCAN1043HGDQ1)
[Dat…
-
I couldn’t follow through example in introduction with double clicks until I found on SO that `throttle` is now a `delay`, which is quite confusing
kibin updated
8 years ago
-
```
The absolute dose matrix in XiO RTDOSE files can be calculated by taking the
pixel data of the dose cube (which typically has a range approximately 0-1e6
corresponding to 0-100%) and multiplying…
-
I have tried all the drivers from 15.x to 17.x and nicehash versions. The card gets detected only up to nicehash version 1.6.1.4 but can't benchmark because of blue screen. Tried legacy and non-legacy…