-
I managed to move the stepper motors through the commands in the Arduino IDE Serial Monitor. But there are still intermittent small movements of the steppers (tracking?) If I enter the command: TRK0 #…
-
```
If the stepper doesn't complete a full resolution or goes for long periods of
time between steps or steps over a long period of time, it gets really hot
due to a bug in the stepper code. It leav…
-
any chance we could see some more details around the trim wheel? thanks
-
Hi Terjeio, I'm trying to use GrblHal on a SKR3-EZ board with 5160 drivers (4 axis). I had some problems with USB communication, but @Dresco helped me and solved it. Now I'm having problems with Trin…
-
I have a problem that when running a .ngc format, if I want to stop it with stop and reset, it doesn't work (my cnc is almost broken, I had to disconnect it). I think it's something about the arduino …
Vald0 updated
4 years ago
-
i got everything assembled on my Myford ML7 and followed another youtuber for the mechanical connection from motor to leadscrew using 2 helical gears 1:1 which worked for him, but it seems with a diff…
-
Sorry if I am naive but is the encoder necessary? I would understand if you were using a DC motor that had no positional awareness but if you use a stepper library like PJRC's accelStepper you can kee…
-
Hi Matthew @mhamilt , I got a new question this time about how to let the motor stop spinning when there is nothing change on each side of the scale like what I do before:
if(L_R_old[0] == L_R_new[…
-
There is noticeable jitter in the vertical registration. This is common among other DIY machines, including those using the Keyence fiber unit Kinograph has.
Avenues of inquiry include:
- mechanical…
-
Actualizacion 2023
Link previos de alguien que cambio la electronica:
https://dyzedesign.com/2018/09/cube-pro-total-conversion-step-by-step-guide/
https://dyzedesign.com/2018/10/our-cube-pro-tota…