-
Getting this error..
Example of my configs
[stepper_x]
step_pin: PE11
dir_pin: PE10
enable_pin: !PE9
microsteps: 16
rotation_distance: 40
endstop_pin: PB14 # PA1 for X-max
position_endst…
-
### Is there an existing issue for this problem?
- [X] I have searched the existing issues
### OrcaSlicer Version
1.9.1 and 2.0.0 beta
### Operating System (OS)
macOS
### OS Version
MacOS 136.2…
-
### Cura Version
5.6.0
### Operating System
MX Linux
### Printer
Voron 2.4 350
### Name abnormal settings
Ironing?
### Describe model location
Model was automatically arranged
### Describe …
-
Is it correct that this is only for 5V fans?
I was looking for just a board like this, but for 12/24v fans.
-
### OrcaSlicer Version
1.8.0
### OS version
Windows 10.0.19045
### Additional system information
CPU: 11th Gen Intel Core i7-11850
GPU: NVIDIA RTX A2000
### Printer
Bambu Lab X1C
### How to…
-
Ministealthburner has an issue that the amount of play in the guidler is significant enough to cause issues when extruding. It could grab filament too weak for fast printing, and everything above 5mm³…
-
### Description of the bug
Whenever I try to slice the [attached model](https://github.com/prusa3d/PrusaSlicer/files/9029208/bagr.zip) on 0.15mm print profile, I get `Flow::spacing() produced negat…
kolba updated
1 month ago
-
V0.2 esun ABS+ Orcaslicer no Z-hop
Having problems printing, the built in support won't stay on the one strip supporting it, curls up and gets knocked off.
-
I flashed firmware to THR36 as it is described in instruction:
- mounted rp2040 as USB drive and copied uf2 file there
- after executing `sudo sync` rp2040 USB drive automatically disconnected …
-
The BOM needs to be updated..
Does not tell you to order 3x12mm bhsc if planning to use the shuttlekeeper for the SB.
should also be updated with what printed parts that you need for the BOM opti…