-
I have a Banggood Omnibus F4 V3 (with Sd Card) setup using a UBLOX spec GPS. I have the I2C remapped from UART3, I have the GPS on UART1, and both the mag and gps work great. Since the R9 Slim only ha…
-
**Describe the bug**
The FC reads the ESC very random. Sometimes not at all, other times, 2 or 3 escs in the stack.
**To Reproduce**
Updated to betaflight 4.0
**Expected behavior**
I expected…
-
**Hi all,
My problem is just like following: could only get the 6-axis data of imu but cannot directly get the quarternion data, any ideas?
---- when roslaunch start ----
W/uvc-v4l2.cc:245 xu_con…
-
Setup : ImmersionRC Vortex 230 Mojo stock
Configurator: 10.5.1
Firmware: BTFL 4.0.0
Target: IRCSYNERGYF3
I have a problem with my Mojo, since I've upgrade to BF4
I had no problem with 3.2 versi…
ChDUP updated
5 years ago
-
Hi,
There may be a bug with the Acro Trainer mode activation.
I have tried to configure it so that it activates with two switches by adding a second range so that it uses two auxiliary channel s…
-
I'm attempting to utilize Cartographer to process rosbags containing data recorded from my simulation environment, ANVEL.
A file with the rosbag and all the configuration files I use is here:
http…
-
matek f722se upon disarm voltage and current sensor values change
put an f722se on 4.0 and arm and disarm
THIS DOES NOT HAPPEN ON 3.5.7
video
https://www.youtube.com/watch?v=bFI3rs8zv4s&feat…
-
**Please note we will close your issue without comment if you delete, do not read or do not fill out the issue checklist below and provide ALL the requested information. If you repeatedly fail to use …
-
I want to test SuMa for other type of LiDAR. And I formulate the point cloud in .bin file which is similar with KITTI format. After that, I change the default.xml in first several lines :
param na…
xiesc updated
5 years ago
-
I picked up `c779432` to reproduce, but running the time machine with the pull request creation date says the package had not been released yet.
I ran `git blame` on `rosdistro` to find out the rel…