-
# 1054. 距离相等的条形码
## 入选理由
暂无
## 题目地址
[https://leetcode-cn.com/problems/distant-barcodes/](https://leetcode-cn.com/problems/distant-barcodes/)
## 前置知识
- 堆
- 贪心
## …
-
Documenting my comment that I left on your fantastic article: https://medium.com/@elisechant/hey-andrei-wow-thats-so-kind-of-you-7f2195e3725a
# Problem
For non-counter integrations, having to pa…
-
Glasgow revC devices use 74LVC1T45 level shifters for the two ports. They support a 1.65 to 5.5 V voltage range, but lack official support for 1.2 V. @attie found out that Nexperia recently released t…
-
## 1. Bug Report:
I have set all _vvids to run at 1.75%_ yet each video only plays at normal speed.
Using Chome web-browser
Also have installed:
- - Adblock for Youtube
- - Return YouTube Disli…
-
Lucky to see this impressive protect, it is with a good framwork. I have tested it in the step mode with an encoder of 4000 PPR. But when I adjust the input signal about 60KHz, that means the speed…
-
The project:
I am using a TM1637 7seg display as a count down timer for a coin operated module. Basically you put a quarter into a coin acceptor module, it sends a pulse to the Arduino, that adds a s…
Vatch updated
2 years ago
-
as in the Title, GPU Frequency (Avg) ,GPU Temperature (Avg) and GPU Memory are displaying constant 600 MHz and 0% Utilization for Frequency and NA C° and NA RPM for temperature. For Memory it always s…
-
Hi, can you please tell me what is going wrong here?
Trying to call KS4 from spikeinterface, I get the error "slice indices must be integers or None or have an __index__ method".
Please see code and…
-
Pretty much as the title says, I'm running into issues attempting to capture DroneID data (Occusync1.0/2.0) with the HackRF_One, irrespective of what I change with the configuration the width of the d…
-
**Copied over from ApacheLabs forums. Add anything new as a comment below. Cheers. Richie.**
On the TODO list (in no specific order)
1) pan adaptor blobs become markers, and have management faci…