-
I found that when I mount the SD card it works fine but lcd functions are no longer displayed.
This happens silently with no errors. I suspect SPI conflict?
-
**Description:**
When I run any kimera nodes, the odometry that comes out is way off of what it should be. It drifts a huge amount, enough that I almost suspect it is putting out positions in mm inst…
-
I'm using this display.
https://www.waveshare.com/2.8inch-rpi-lcd-a.htm
This doesn't give me the coordinates. I keep receiving None. How can I fix this?
print(xpt.get_touch())
-
Rpi zero with 16x2 display i2c.
After sudo./install.sh I run python3 display_16x2.py :
Traceback (most recent call last):
File "display_16x2.py", line 4, in
from module.i2c import *
…
-
Hello - thanks so much for the hard work on this driver! For my application, I have a Raspi Pi 3A+, and at least three different generic ILI9341 displays, a 2.2", 2.8" and 3.2" - all the same manufact…
-
Last year I had no problem making an I2C_1602_LCD display work with your MicroPython driver. But when I tried it again just yesterday, I found that the software no longer worked. I kept getting an err…
-
Hi! I recently bought the MKS Robin Nano 2.0 board and an MKS TS35 2.0 display. When downloading the firmware available here on github (Mks-Robin-Nano-Marlin2.0-Firmware) and trying to configure it …
-
**Short description**
With a 31,5" 4K display running at 4K and 150% global display scale running Fedora KDE with Wayland the photo being viewed/edited in RT is slightly blurry at all zoom levels and…
-
If the software allows remote operation, let's go ahead and go the whole way. We should be able to view what's being displayed on the LCD at any time, anywhere. There are codes, interactions, and mess…
-
```
What steps will reproduce the problem?
1. Have basic code for TVout
2. #include
3. Monitor stops displaying
What is the expected output? What do you see instead?
I expect to see text on the scre…