-
Hello,
I downloaded the repository and want to use the "LoRaWAN_End_Node" as a basis to work from with the "STM32CubeIDE" environment.
I have a NucleoWL55JC1 board that has a cm0 and cm4 chip. Whe…
-
Hi, I have a bunch of older boards with plain ESP32's and `CP2102` USB-serial-converters. One of them, a Heltec Wifi LoRa board (the original, they seem to call it V1 now) worked with `espflash` versi…
-
Hi all
I am trying to flash a BSD34 smart socket. I have downloaded the latest tuya master built using git. Working on an RPI 3B. I can connect the socket using the normal smart life app. I did thi…
-
**Please provide the following information:**
- OS: Ubuntu 22.04
- ROS 2 Distro: Humble
- Built from source or installed: Source
- Package version:
Package: ros-humble-clearpath-common
…
-
### Describe the bug
Vehicle control now works with the new proxy. However when the car goes to sleep the proxy commands do not wake the vehicle.
### Steps to reproduce
1. let the car go to …
-
**Describe the bug**
I noticed when testing LoRaWAN_End_Device_Reference.ino
in case node.downlink() is taken out as I don't need a downlink
It is also no longer possible to send an uplink
From th…
-
hi, i try the network / mesh example between 2 pico boards but not get the mesh working...
i try 1 node with Y > 0 and 2nd with Y > 1.. it will not connect to the mesh master. With 1 node as arduino…
-
Type: Bug
## Issue Description ##
## Steps to Reproduce ##
## Expected Behavior ##
## Actual Behavior ##
## Logs ##
### C# log ###
Post the output from Output-->C# here
### C# LSP Tra…
-
The problem was reported as #27.
The output console displays:
```
[12/12/2021, 18:20:24] Unable to resolve configuration with compilerPath: "C:\Users\ilg\Desktop\gcc-test\xpacks\.bin\g++"
```
…
-
### Problem description
I have a frustrating issue with this power plug. The first lot of 5 that I installed worked great and the power measurement sensors work accurately and consitently
So 2 w…