-
```
pi@raspberrypi:~/Waveshare-DSI-LCD $ cd 5.15.56/
pi@raspberrypi:~/Waveshare-DSI-LCD/5.15.56 $ ls
32 64
pi@raspberrypi:~/Waveshare-DSI-LCD/5.15.56 $ uname -r
5.15.61-v8+
pi@raspberrypi:~/Wav…
-
Hi,
One of the most common complaints about mimic is the long compile times it requires. The main cause for that is that the mycroft voice is compiled embedded in the mimic binary, instead of being…
-
1歩分の旋回移動の重心軌道生成に必要な処理時間を予見制御を用いた重心軌道生成システムとPCPCによる重心軌道生成システムで確認する.
ここでの1歩は右脚もしくは左脚が地面から離れて着地するまでを指す.
処理時間の比較は重心軌道計算開始から1歩分の重心軌道が計算し終わるまでの10回の平均値とし,
計測にはboostライブラリのcpu_timerクラスを用いて計測時間を測定する.
…
-
ElasticSearch is a very heavy method to run on a Pi just to store a few configuration values. This issue is to replace it with Apache Derby or another lightweight datastore.
Bounty: https://www.bount…
-
Related to https://github.com/influxdata/influxdb/issues/23212
__Steps to reproduce:__
1. On a populated server (2.0.5) run: influxd inspect export-lp --bucket-id 540a390190697254 --engine-path …
-
I have BerryBoot installed on a Pi3 (32 GB card) and I have two copies of Raspbian installed on it. When I got the two images on there it said there was still well over 16GB free. I worked on some Lin…
-
Hello All,
I'm using the latest build, berryboot-20181211-pi2-pi3 on my pi 3 (not plus)
I have a few issues... first off is wireless supported with iscsi? I ask because I have my berryboot usin…
-
bonjour,
depuis la dernière réinstallation complète du système :
Pi3 B rev2.1
OS 2017-11-29-raspbian-stretch
Jarvis avale la fin des derniers mots suite à une commande ou même "oui" en répondant…
-
Currently, when building from source if you are missing certain things (like compilers...) the build fails with very verbose errors containing many things that are not relevant:
```
[imcinerney@pi3…
-
I prepared pinn for a raspberry pi2b, also checked for kano os. As it turned out kano for rpi3 got installed so it wont launch. A rpi2 version of the os also exists.