-
Do you have any idea if it is possible to pre-assign pins for the fitter?
It seems like the fitter somehow allow this; There is a -preassign option to the fitter which takes argument Try | Keep | …
-
Sometimes you might have a question that is not a package issue.
For this reason I set up a Discord server, so people can chat in general about the package and ask for advice etc
https://discord…
-
This was my first time install so followed instructions, thanks. Couple of suggestions:
- Access to PCB is really easy - 4 mains screws under the base.
- I removed the WiFI panel cable (carefull…
-
IS
- Only **row** pins are driven
- Diodes in "Col -> Row" direction are not supported
SHOULD
- Inverse diode direction should be supported, e.g. with a flag on construction
- Then the **column…
-
**Describe the solution you'd like**
Offer a third layout option, that lays out the pins grouped by their logical function as configured. So GPIO pins would be together (maybe inputs grouped and outp…
-
@DanielnetoDotCom What is this "Pinned" function? It just appeared and I don't know what it is and what it's for...
![image](https://github.com/WWBN/AVideo/assets/37880073/0fe951f5-d0ed-4dda-b774-c…
gbrn updated
10 months ago
-
I installed by pomotroid running : `scoop install https://raw.githubusercontent.com/Splode/pomotroid/master/pomotroid.json
`
I find that everytime pomotroid running is in a temp dir .
if can per…
-
hellen154hyundai_f7 board powered with +12v
```
2024-07-20_23_03_45_540: EngineState: mc33810 spi loopback test failed [first 0x800F][spi check 0x400F][COR] vBatt=12.250442512 count=1
2024-07-20_…
-
Am i missing something or dont this repo have info about how to connect the board to the genvex? :)
I have been looking into the following:
Optima 250 and Genvex GE Energy 2
The genvex GE Energy 2 …
-
Hi all
Ive been working on a project for my Orange pi 5 Plus for computer vison and wanted to use the HDMI input for real time video input without network pipelining. from all my testings ive come …