-
After using USB4VC with different keyboards (USB, BT, combined mouse and KB dongles) and all of them working perfectly, I just got a Keychron K5 SE keyboard, which has the following issue.
Function…
-
Hello, thank you so much for this guide!
I flashed the pre-compiled "keychron_k6_rgb_via_ansi" VIA enabled firmware - it successfully flashed (I know because some of the FN key mapping is different…
-
バックライトに対応するため、ほぼ固定のレイアウトに変更する。
## 概要
- US104キーキャップですべて埋められるレイアウト。
すべてソケット対応。
- カスタムキーキャップで、完全なレイアウト(1.5u Enterなど)または柔軟なレイアウト(40sキット)を構成可能。
US104のソケットとLEDの配置を優先するため、スルーホールの可能性あり。
- レイアウトのバリ…
-
# システム環境設定
- ソフトウェアアップデート
- あればやっておく。
- Dockとメニューバー
- Dockを自動的に表示/非表示 => チェックを入れる
- サイズ: 30%くらい
- 拡大: 50%くらい
- トラックパッド
- タップでクリックを有効に
- 軌跡の速さ: 70%くらい
- ディスプレイ設定
- よしなに
- 指紋
…
-
awesome work. looks like you are trying to imitate an ortholinear keyboard by shifting the right hand one key. i was trying this layout today for a while. it feels better than qwerty of course.
have …
-
### Issue Description
Hello, i use rp2040 pro micro, custom layout, had been working great so far but after some consecutives flash the layout doesnt update anymore. I tried qmk clean with no succes.…
-
Given that ZMK supports UF2 firmware update, is it possible to just drag a keymap file (YAML, JSON or whatever, even plain TXT) under its DFU mode? For example:
```
<
&kp N1 &kp N2 &kp N3
&kp …
-
I just solder it into the power led holes, then control it by a RF remote.
If there is any way to solder a led strip, to be controlled by the pcb, it will be best.
-
### Describe the Bug
Right now to get the ~ character, I have to press shift + fn + esc. Need to make this easier.
### Keyboard Used
jz58
### Link to product page (if applicable)
_No response_
…
-
Having a programmable keyboard, I'm facing the issue to have a qwerty keyboard displayed on the training view while using a non-emulated dvorak... and it is distracting...
I propose to let the user…