-
Hello,
i tried to setup the latest version(2024.04.12) in a new setup once with 4 and with 5 beacons.
If i configure 4 beacons everything works like expected but if i configure 5 beacons the ttgo-…
-
In the UK we have granted a different frequency for LoRa than the rest of Europe has. It's 439.9125 but the configuration allows 3 decimal digits only. In fact, we need 4 decimal digits configuration …
M0IGA updated
2 years ago
-
Hi looked in the code and documentation but can't find a schematic on how to connect the db9 joystick ports to the ps/2 mouse port.
Where i can find it ?
-
First, thanks for your incredible works!
I ran into a bit of a snag with the linked cases though. Pulling the USB-C cable seemed to yank the whole thing apart, and apparently some newer T-Displays …
-
### Board
ESP32 wrover dev
### Device Description
Brand new ESP32 Wrover Dev board with Camera, tested with wifi scan and that worked.
### Hardware Configuration
No
### Version
latest master (c…
-
Hi guys, first of all: Thanks for your great project...
I am using your driver located here: Drivers/SIM800L.py
I don't know where can be a problem and i am writing here entire my scenario and spe…
-
Hello, I'm new using ESP, but I'm trying to use ADS with the T-display and I can't make the connection. I am using the example of the I2C Scanner and I believe that the wires are correct according to …
-
How could i read battery voltage from the battery that could be connected on the board?
-
Hello, I personally don't have a CubeCell.I was thinking about making one version that can support the universal LoRa.h library as many devices use it and I think is not a big deal.
I want to run i…
-
![ttgo-config-1](https://user-images.githubusercontent.com/6020549/64899699-a402e580-d6c7-11e9-9b09-e2a27c82f0fa.jpg)
![ttgo-1](https://user-images.githubusercontent.com/6020549/64899702-a6653f80-d6c…