-
Hi
I've been struggling with my 3D printer for longer than I'd like to admit, running into a mass of out-of-this-world issue, the latest being that the bootloader of the STM32G0B1RE sometimes refus…
-
### Development Kit
ESP-WROVER-KIT V4.1
### Module or chip used
ESP32-WROVER-E
### Debug Adapter
FTDI
### OpenOCD version
v0.12.0-esp32-20240821
### Operating System
Linux
### Using an IDE ?…
-
I chose EPS32-PICO-V3-02 chip and board for testing. But there is no way to specify the correct board in PlatformIO. I found the Denky D4 (PICO-V3-02) to be close to my choice, but the info only says …
-
This definitely worked a few months ago, but I've changed laptops since then and now it doesn't:
```
$ openFPGALoader -b tangnano9k --verbose-level=2 build/counter.fs
empty
Jtag frequency : requ…
-
It would be nice if VexRiscv had support for vectored interrupts. Basically something like fast interrupts in [Ibex](https://ibex-core.readthedocs.io/en/latest/exception_interrupts.html).
-
board:esp32-wrover-kit-3.3v
development environment:win10 + clion 2022.2.4
During the secondary development of the esp32 project, I downloaded this plugin and made the following settings
![72a649e5…
-
**$ fusesoc run --target=sim swervolf**
INFO: Preparing ::cdc_utils:0.1
INFO: Downloading fusesoc/cdc_utils from github
INFO: Preparing chipsalliance.org:cores:SweRV_EH1:1.8
INFO: Downloading chip…
-
#### 1. Embedded C, ARM Assembly
#### 2. MCU ( Ardunio Uno, STM32F4XXX )
#### 3. OS Concept
#### 4. One CPUSS architecture ( ARM or RISC-V) [ As you are doing all the stuff for the cpu computation …
-
Currently, the method for programming the FPGA on the Arduino Vidor is:
1. Use Intel Quartus to do the FPGA development
2. Obtain a bitstream
3. Paste the bistream into the header of a specific Ard…
-
I have built it from sources for M0S Dock and the device is not stable. Sometime it freezes during communication but typically it cannot be detached from device and hangs when closing the connection.
…