-
**Godot version:**
Godot Engine 3.1.1
**OS/device including version:**
Windows 7 x64bit
8 GB Ram
GTX 980
**Issue description:**
Godot Editor can't handle complex level
as you can see in …
-
when passing u and y into SIPPY those two arrays seem to not have a type when they should be floats. I poked a little and self._y and self._u in the PX4SYSID class seem to be 1x1250 floats as expected…
-
Need a magnet in the brush holder for RPM sensing.
@GeorgesOatesLarsen Below is the link for the magnet I'm considering for RPM sensing. It's the same width and depth as the brushes. (1/4"x1/4") so…
-
How can I achieve an animating globe like on the worldcoin page? https://worldcoin.org
I am in particular interested in the extruding dots. I already managed to get the dotted continents, but …
-
Attached is an interpolated pol file where the interpolations occur in higher winds, and while the interpolation seems to be working, the interpolated values are a little off if you consider the fact …
-
- http://homofaciens.de/technics-machines-v-plotter_en.htm
- http://www.open-electronics.org/how-to-make-an-opensource-vertical-plotter/
- http://polargraph.bigcartel.com/ especially the sprockets …
-
#### The basic idea behind the mod is to have positive and negative charges, to complete a circuit you need both, just as you do in real life.
To begin with we need to implement the basic components …
Megaf updated
8 years ago
-
Idea to add a Propane/Wood Wall torch for a light source, refuellable like an Antique oven. these give off light like a campfire but at a greater range. you can get a standing/wall torch. the wood tor…
-
Hey,
I just installed your package and all requirements, tried to run your first example usage and got the following error:
```
-------------------------------------------------------------------…
-
OCA presents a model for electrical distribution hierarchy in OCPP2.0 "Standardized Components" 3.2.24, and gives an illustrative example at 3.2.41
An example. The incoming fuses are all 120A.…