-
I use ROS kinetic in order to be able to drive my differential drive robot and I also use range_sensor_layer package (Branch Indigo V0.4.0) in order to be able to use SRF sensors. Recently I noticed t…
-
In order to reach milestone 0.1 we need to be able to demonstrate single motor control based on sensor readings from the MPU-9250. The physical setup will be a lever attached to the desk via a pivot w…
-
Add an experimental feature that allows TS users to connect their device to a BLE mesh off-grid communication device like https://meshtastic.org.
There's already an android app for meshtastic, but it…
-
This is a bit of an odd one. It looks to me like the RTC has stopped, and thus the wake command wasn't issued.
The 1:15 UTC reading was taken fine, but it didn't wake up, and so no more readings we…
-
One of the main use cases of this project is for filament that is more or less experimental/home-made, and thus varies a lot in diameter, but that you want to print anyway. This filament diameter sens…
-
```
What steps will reproduce the problem?
1.used the code provided in the book "Building Wireless Sensor Networks"
2.Configured the coordinator and router accordingly.
3.Built the sensor network.
4.r…
-
```
What steps will reproduce the problem?
1.used the code provided in the book "Building Wireless Sensor Networks"
2.Configured the coordinator and router accordingly.
3.Built the sensor network.
4.r…
-
Hi,
I discovered some strange behavior with owserver and w1 driver as source. First of all, the sensor works when I query the kernel driver:
```
thomas@rpitemp:~ $ cat /sys/devices/w1_bus_maste…
-
Hello.
I'm trying to get xdrip working and am having no luck. Hoping someone can help me figure out what I'm doing wrong.
So I downloaded the xdrip app on my wife's phone, went through steps 1 …
-
Zitat aus Forum:
> Könnte man für die Helligkeitswerte bei der Beschattung ein anderes Device nutzen wie bei den normalen Fahrten? Es würde mir auch reichen, wenn es nur ein anderes Reading wäre, d…