-
Am testing one of the chai3d examples with the Haply Development Board on a Windows desktop connected to one of the COM ports. Chai3D is establishing the serial connection successfully and outputting …
-
**Overview**
Non UTF-8 data is corrupted by the time it gets to the `data` listener.
**Example**
Use ptyw.js to spawn DOSEMU or QEMU + FreeDOS under CentOS 7 using their virtual serial ports. From t…
-
```
Hi everyone,
somehow I spent the last couple of hours trying to sort out why the Arduino IDE
didn't see my Arduino (under Tools->Serial Port) on my linux system
(Archlinux).. it turns out that …
-
Hi Kevin or anybody -
Perhaps I am trying to be too clever because I decided to use an ATmega328 chip on its own for space saving reasons. I can get the autoguider code to work if I go through the st…
-
I have more than 64 COM Ports configured in my Windows System. Windows 10 supports 4096 COM Ports.
After opening 63 Serialports with `SerialPort serialPort = (SerialPort) commPortIdentifier.open("N…
-
Normally when software goes out to test we forget to do something that sets us back by about an hour. Previous instances have included:
- Forgetting to turn on the radio before internal power (snaps s…
-
## Steps to Reproduce
1. Connect any device to serial port or USB device with virtual serial port (i.e. /dev/ttyUSB0)
2. Run code
```cs
_port = new SerialPort("/dev/ttyUSB0");
_port.DataRe…
-
Pinout shows ??? on graphic display for Pi Zero 2 W? But /proc/cpuinfo shows correct information.
,--------------------------------.
| oooooooooooooooooooo J8 +====
| 1ooooooooooooooooooo | USB…
-
Add `node-red` user to `dailout` group by default instead of node-red group.
From [Debian Wiki](https://wiki.debian.org/SystemGroups):
>dialout: Full and direct access to serial ports. Members of …
-
Hello, I want to transfer data from the microcontroller in the application. How do I need to configure the data to be read from COM5?
![image](https://github.com/ngscopeclient/scopehal-apps/assets/…