-
### Version
1.41.2 Win64
_Use `About->About Slic3r` for release versions_
_For -dev versions, use `git describe --tag` or get the hash value for the version you downloaded or `git rev-parse HEA…
-
### Cura Version
5.4.0
### Operating System
win 10
### Printer
ender3
### Reproduction steps
load project file and slice.
https://i.imgur.com/KIsOEvP.png
https://i.redd.it/6c2e7iqnsicb1.png…
-
### Version
PrusaSlicer Version 2.3.0+linux-x64
### Operating system type + version
Linux, Ubuntu 20.04.2 LTS x86_64
### 3D printer brand / version + firmware version (if known)
MK3S
…
-
2.35.55.2 / Win10 x64
My expectation here was that the support spacing (from the part) would be consistent across these two areas, as defined in the settings.
The support pattern instead seems …
CCS86 updated
3 years ago
-
### Version
Prusa Slic3r 2.2.0+
202003211132
### Operating system type + version
macOS 10.15.5
### 3D printer brand / version + firmware version (if known)
Prusa Mini 4.0.5
### Behavior
Wh…
-
### Description of the bug
This is the first model that has triggered any issues in 2.6alpha3. I have had NO issue until now. This model slices correctly as it is oriented on import, but the slicer c…
-
### Description of the bug
please save travel
Solid infill printed from left to right, even though the start and end of the perimeter is on the right?
There you have an extra travel to the left t…
-
Hi Mark!
An interesting thing in your build is that, when i checked my prints, it does produce too many segments but when compared to Cura4.6.0. it doesn't produce those many,
Used the same profil…
-
### Description of the bug
Loading a support enforcer .stl does not always generate support when 'For support enforcers only' is selected. In my example, switching to 'Support on build plate only' d…
-
### Description of the bug
when i am doing cut for a moment everything is all right but after couple of seconds my cut is vanishing (sorry for my english)
![Zrzut ekranu (3)](https://github.com/prus…