-
https://forums.adafruit.com/viewtopic.php?f=57&t=124748
https://github.com/FastLED/FastLED/issues/476
-
Would be good to have an option which will allow overriding built-in dev/platform packages or providing a new one. Proposition is to add `platform_packages` option to `platformio.ini`. For example,
…
-
I have a genuino Arduino Deumilanove and an Uno clone with the ch341 chip and a genuine Mega 2560 R3, none of which are detected by the arduino-cli and cannot be used.
Dell Vostro 1720 64bit
Linux…
-
Trying to get this library running with an [Arduino MKR1000](https://store.arduino.cc/arduino-mkr1000) but it fails with the following errors:
```C:\Users\X\Documents\Arduino\libraries\SparkFun_Simul…
-
Installing Arduino SAMD Boards 1.6.11 with Windows fails:
Error downloading http://downloads.arduino.cc/CMSIS-4.5.0.tar.bz2
Going to http://downloads.arduino.cc/CMSIS-4.5.0.tar.bz2 gives me a 403 …
-
I have had problems writing to the onboard filesystem from Windows. I sometimes see complete filesystem corruption, and sometimes just problems with one file. See https://forums.adafruit.com/viewtopic…
-
When trying to upload a sketch under Linux, the following error occurs:
> java.io.IOException: Cannot run program "{runtime.tools.bossac-1.7.0.path}/bossac": error=2, Datei oder Verzeichnis nicht g…
-
After waking from the RTCZero Standby the system freezes when I attempt to use interrupts. Is something not being reset after standby?
I am using a library called Retick that throttles the loop and u…
-
The Library Adafruit_QSPI has an example "fatfs_format which is supposed to format the internal flash as a FAT file system , but fails as below. The qspi_flash_test.ino example works fine so I know th…
-
I have an Arduino Due, when im compiling there is a warning message saying that the program architecture is SAMD and arduino DUE is SAM.
im trying to upload the example MPU9250_Basic
it compiles and…