-
I would like to ask whether or not this could be a good idea or not, typically with abl alone, especially on my machine, the left side were higher compared to the right side. But physically the nozzle…
-
Hi guys,
Yesterday I updated Marlin to the latest version.
My printer is a Delta mini and it has a proximity sensor.
When I'm running G29, the extruder is going down until it heat the aluminu…
-
I test current versions of Marlin 45cfadc
G29 command not working normal. I got more than one measure per point
For 3x3 points field counts of measures is:
```
0 0 0
1 1 1
2 2 2
```
For 4x4 points f…
-
Hallo
I have some trouble setting up the ABL for my Printer.
I calculate the Z-Probe_Offset as follow ...
**Run G28
Run G92 Z10
Decrease Z ( 0.1 Steps ) till the Nozle is 0.1 mm above the Bed…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
When enable the CHAMBER_FAN without enable the AUTO_FAN it gives a compilation error CHAMBER_…
-
Marlin now ignores M851 Z-probe offset completely with the latest RCBugFix!
Actually, all EEPROM offset settings are ignored by auto bed leveling, that means X and Y are ignored as well. I could help …
-
Please, before you create a new bug report, please make sure you searched in open and closed issues and couldn't find anything that matches.
**Printer type** - Mini
**Printer firmware version** - …
-
### Application Version
unknown
### Platform
Creality box and creality cr20 pro
### Printer
creality cr20 pro
### Reproduction steps
Hi, I Have a Cr 20pro and since I got it I had some trou…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
When I uncomment `PSU_DEFAULT_OFF` in my configuration, sensorless homing is now failin…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
Hi
I have problem with delta calibration,actually it is my first time using auto calib…