-
been having a weird issue and I think it may be related to the new updates.
![Screenshot 2024-01-26 170216](https://github.com/viesturz/klipper-toolchanger/assets/99470771/217ba6d3-0ce2-4a47-92e9-a2…
-
Hi,
I am trying to port my project:
https://github.com/Blebowski/CTU-CAN-FD
that I run with VUnit from GHDL into NVC. I managed to get everything working, and I can run the regression
with the…
-
Pierre,
I've been using the library for a while now and had been using `ACAN_T4::can3.transmitErrorCounter()` in my code. Since I upgraded to the current version, I'm getting a lot of **Transmit E…
-
Hello everyone,
I currently started with the STM32H747I_disco and CAN. The CAN implementation looks like this:
fdcan1: can@4000a000 {
compatible = "st,stm32h7-fdcan";
reg = , ;
reg-…
-
**Your Setup**
Platform: EVSE
Firmware Version: V02_00_01
Host Controller Interface: SPI
Host: FreeV2G (EV_v2.0.1_4)
**Describe the bug**
Actually, I'm not sure it's a bug, but let me explai…
-
**Your Question**
Our SBC talk with WB-CARRIER-BOARD-EI 1.1(EVSE) via Ethernet connection. But canbus communication would be more better for us. Is there any chance to use canbus communication? Do …
-
### What happened?
I was trying to adjust the layer height at which the fan would run at full speed. Any value greater than 3 causes an error then a crash of the entire slicer if you hit ok on both…
-
-
Hi,
i am using SB2040 with UTOC-3 to communicate to my RPI.
i successfully flashed the SB2040 with Katapult on a 1,000,000 Canbus speed. however i am getting timeouts on homing so i decided to t…
-
Hello,
I've tinkered with the canbus of our cars a fair bit. by miself.
I was really interested to try your code but I have no background in Python ( Only C# )
I've followed your instruction on…