-
Set of physical modifications needed to airframe, or additional parts needed before the first dry run of launch.
1. Install av bay (camera + flight comp) into nose cone connector section:
- CAD up…
-
[nozzle-fan-mk3_1.zip](https://github.com/prusa3d/Original-Prusa-i3/files/1607129/nozzle-fan-mk3_1.zip)
Lettering pokes into air chamber causing roughness, Increase $fn value to give smoother curve…
-
I think that the classifiers code are very complex, and it's not because of data science context knowledge necessary to understand it. I'm afraid that few people will be able to maintain it in a near …
-
**Is your feature request related to a problem? Please describe.**
No, there is no problem, just a convenience thing.
**Describe the solution you'd like**
I'd like the Cabin Lamp to be able to tu…
-
>1. Preferred term label
A: myocardial noncompaction
B: ventricular myocardial noncompaction
C: atrial myocardial noncompaction
>3. Textual definition
A: failure of the heart myocardium to re…
-
The barge is represented by the ```BOAT``` object, which is local global to the following rooms:
- BARGE-ENTRANCE
- SE-CORNER
- NE-CORNER
- SW-CORNER
- NW-CORNER
- BARGE-EXIT
- BARGE-CENTER
…
-
Hi,
Is somebody meet this kind of error ?
I try to use bed temp sensor, an error "E1 THERMAL RUNAWAY" is display at boot .
I checked pins configuration, but i do not understand what is wrong.
Fai…
-
https://github.com/ClumsyAlien/TimelessandClassics_Reforged/assets/58884580/3b1b9d49-5049-48bc-9b26-fbbf977dcd5e
This Bug is for all guns that have Mag Slot attachment and the Mag slot dissapears w…
-
I came up with this idea due to a layer separation issue on large abs prints. My temp was tested on a small model, when switching to a larger model I do not get good layer adhesion. Some testing show…
-
### Describe the feature you'd like
I'd like to see the amount of coal received from enriching a coal ore block from 2 to 3.
### Describe alternatives you've considered
_No response_
### Additiona…