-
After upgrading from v0.9.7 to 0.9.8 the temperature is set to 'null' (shown as attribute) when changing hvac mode.
When this happens I have to manually set the temperature attribute via developer t…
-
I followed your guide, and so far I'm having issues with the steppers A, B, C.
I'm getting a ton of vibration from the stock motors.
Only 2 of the 3 arms are homing correctly, only 2/3 are hittin…
-
This is what I have in my logs....
2021-02-13 11:13:52 INFO (SyncWorker_0) [custom_components.goldair_climate.device] refreshed device state: {"devId": "03016700e0980606e6f6", "dps": {"1": true, "2…
-
After updating to the latest 2024.10.5-Beta, I sometimes get errors in my HA logs that point towards datatime.time object not being iterable:
```python
2024-10-26 22:06:59.645 ERROR (MainThread) […
-
Chamber heater is displayed as **Bed**, so I have 2x **Bed** heater in the list. On Mobileraker or through web interface, it properly shows as a **Chamber**.
Also when trying to set the temperature f…
-
https://stackoverflow.com/questions/45693688/xarray-automatically-applying-fillvalue-to-coordinates-on-netcdf-output
-
OpenCV offers some "reasonable" methods to detect people. They are not as accurate as CNNs and use HOGs but are of orders of magnitude faster. The code is straight forward, for example, [this](https:/…
-
i noticed a ugly behaviour:
system: rpi4 / octoprint 1.5.3 octopi 0.18
If plugin is enabled and an error was reported from printer and you try to reconnect it is not possible caused by no exclus…
-
Can anyone on "Wiki" describe step by step how to connect and properly control the RPM via PWM-DAC 0-10V. Chinese spindle with inverter? So far, I've done it with the vfdPlugin-1.7.1 plugin in Mach3. …
qulet updated
5 years ago
-
I have an Opel E-Corsa 2022 and when I try to charge my car there is about 3 amps difference between the Setpoint and Current. I'm sending via MQTT the Voltage topic to Openevse to improve the calcula…