-
## Current Behavior
as of inav 7.0, autolevel will pitch up or down when autolevel is enabled. Sometimes the pitch up or down is hard, or soft. Making the tunning process very hard. Aircraft will …
-
## Current Behavior
INAV 7.0 just flashed on the SPEEDYBEEF405V3 with inav 7 configurator , no diff applied .
Turn on my googles HDzero and return video is fine .
MSP display port activate on por…
-
## Current Behavior
When my quad was in acro mode, flying forwad at low speed, I activated RTH and the quad turned upside down in the air in its attempt to return home. After multiple swings It man…
-
## Current Behavior
# safehome
No idea where these safehomes are after a few days because they have no location NAME...
safehome 0 1 490180660 -664490499
safehome 1 0 492580550 -684690466
safehom…
-
## Steps to Reproduce
1. git clone https://github.com/iNavFlight/inav.git
2. ./build.sh FLYWOOF7DUAL
## Expected behavior
Builded firmware file
## Suggested solution(s)
I suggest to rollback…
-
## Current Behavior
I have not found this feature and on seems to me that there have been other requests like this.
It would be very useful that with fixed wings after an RTH due to unrecoverabl…
-
Hello everyone,
I just installed rush tank solo on speedybee F7 v3 using Inav7. after everything was on I started to open the osd via the radio transmitter then went into the vtx settings and appare…
-
### Describe the bug
I cant change the canvas height an widht to default, it always goes back to some strange nummbers.. so i cant have the correct osd placement.. 4.4 it works fine 4.5zulu rc1 and r…
-
I replaced the aging Pixhawk on my 790mm hexacopter with a Matek F765-WING and was wondering if anyone had some tips for the PID settings in iNAV (the largest prop size mentioned in the configurator 1…
-
## Current Behavior
At the moment, INAV does not support the JHEMCUF411 target
## Desired Behavior
My suggestion is to add support for this board to INAV