-
## Bevy version
4f16d6e0dc14c12ab29b72880d5d3d22003eed72
## \[Optional\] Relevant system information
Not all devices are concerned, from some tests:
- Samsung Galaxy A11
- Xiaomi Redmi Note…
-
Hi, I'm tracing the source of different results obtained in pyscf and pyscfad for the same system. It turns out that the difference is already at the HF level, even thought the HF energies (and also M…
-
For the exact same setup, a Pop III simulation on Setonix GPUs show a very different evolution as compared to CPUs. The initial density projections on both are identical:
![plt00000_Projection_z_ga…
-
Dear Dr. Sedahmed ,
Thanks for your work ! I am doing some multiphase flow study now with MF-LBM-CUDA. Your examples is Imbibition, it works well and run fast, but the drainage seems not good. it dr…
-
Using octree depth of 5, I get the following output:
```
Input Points / Samples: 1000 / 999
# Read input into tree: 0.0 (s), 0.0 (MB) / 45.7 (MB)
# Got kernel density: 0.0 (s), 0.0 (MB) / 45.8…
-
## TL;DR
Get this error when starting second container via Docker when containers use networking:
```
Error response from daemon: failed to create task for container: failed to create shim task: …
-
Kata created a container and specified device [VFIO device]. It was found that the virtual machine could not be started and the CPU reached 100%.The configuration used is "cold_plug_vfio = "root-port"…
-
### Describe the bug
Subject: Regression: DSA breaks roaming to WLAN bridged to VLAN
# Summary
When bridging a WLAN with a VLAN on DSA-enabled OpenWRT versions, an erroneous FDB entry creates 1…
-
Running it on University of Arizona HPC, using a Singularity container.
```
...
- Simulating: 04/29/2008 00:00:00 UTC
=== Time integration ends; Total elapsed time= 8012.8 ===
------ E…
-
I'm unable to upload the firmware to my cheetah v1.1 , I tried to upload with a mac and a raspberry pi but I get the same error. Am I missing something ? :
stm32flash 0.5
http://stm32flash.sourcefor…