-
Using ffmpeg from [gyanet](https://www.gyan.dev/ffmpeg/builds/), calling:
```
ffmpeg.exe -loglevel debug -i "bluray:G:\TestClips&Co\discs\Blu-ray\x264 BR-Demo"
```
works properly, returning:
```
…
Selur updated
3 months ago
-
## Bug Report
### Description
trying to use talos for the first time and following https://www.talos.dev/v1.7/talos-guides/install/local-platforms/virtualbox/
when doing `talosctl apply-config -…
-
The below description gathers a list of bugs that the upstream frrouting software has.
Some of the bug issues described will be processed or are already processed as part of separate pull requests.
…
-
Hey this is the first time I tried this one so I'm not exactly sure what it's *supposed* to do, but all it has is a kernel and initramfs which I assume is the installer? I get the "using serial inter…
-
### G3-31: Section 7.1.2 - English Text clarity
**G3-31a**
Old text:/
The SRv6 Service SID allocated by an egress PE is not routed. The
service route is advertised by the egress PE with…
-
Based on https://netlab-cicd.pages.dev/_html/srlinux-clab-vrf it looks like every test scenario that uses BGP in a VRF fails.
According to one validation log (https://netlab-cicd.pages.dev/srlinux/…
-
半年之前用lede编译的er-x固件都正常工作,今天用新源码重新编译了一下,更新后eth0网口无法驱动,网卡指示灯都不亮,看日志发现有一条错误是:mtk_soc_eth 1e100000.ethernet eth0: error -17 registering interface eth0
编译的内核版本是:5.4.224
-
**Describe the bug**
Got a UHD to rip, but `autocrop` didn't recognize the file properly, so I had to crop it by myself and got a warning on the bottom of StaxRip which said "You have cropped the top…
-
i did a new install, everything went smoothly but i am waiting for about 24 hours now for ETL job to be completed. I can tell it is likely not done because i didn't see anything related to NX-OS (the …
-
Hello everyone, here I add a w83795adg and two temperature sensors on it, but they have no effect.I checked the experience of other people in the list and found that my / sys / class / hwmon did not g…
wws66 updated
4 years ago