-
Good morning 1technophile
I wanted to know if what I'm encountering is normal or not!
I have several ESP32 antennas with OMG version 1.6.0 on them.
Everything works well, I have the presence of…
-
Hi,
I wanted to give a try with your non blocking library,
But I can't successfully compile it with arduino IDE 2.3.2.
The board I use is a ESP32 developpement board with 38 yellow pins https://a…
esp13 updated
5 months ago
-
Apollo3 Blue MCU is not able to communicate with SX1262 transceiver over spi. For test purposes, I used sample/subsys/lorawan/class_a example project.
The code is running on RAK11720 module from RA…
-
**Is your feature request related to a problem? Please describe.**
The device is not supported, I request a full support of this device.
**Describe the solution you'd like**
Full support for the …
-
The EVerest project has open hardware as well https://everest.github.io/nightly/hardware/pionix_belay_box.html which is available as a kit from Pionix. Pionix also sells the uMWC (https://shop.pionix.…
-
Hi @Anime4000
I saw you post on lowyat.net about TWCGPON657 that should support HSGMII on LAN side (2.5Gbit/a). Looks like that also HiSense LTE3415 reports this protocol on the data sheet. Chipset …
-
**Describe the bug**
I've been able to get everything setup and working using the virtual CAN bus vcan0. After transitioning to using real hardware and a real can bus, can0, I'm running into issues g…
-
Hello, I tried to connect our board to the ESP32 development board, and there was an error when loading the driver.
The following is the diagram of the hardware connection. We connected seven signa…
-
So the current reception architecture was created back in 2014 when I was working on a very, very early proof-of-concept (the protocol was first announced in 2014). A lot of ground-breaking changes we…
-
---
**Describe the bug**
The build process stops at the last line during the execution of the build command using west in VSCode. The issue occurs after the first successful build, and subsequent …