-
**How to reproduce:**
$ ./tools/configure.sh stm32f4discovery:usbnsh
$ make -j
Flash nuttx.bin
The /dev/ttyACM0 will be created, after opening it on minicom the nsh> doesn't show up after pressi…
-
### Describe the bug
![image](https://github.com/PX4/PX4-Autopilot/assets/9113272/863d4bf0-e606-41ea-9642-c5df75f97a82)
Using the RC1 1.14 and the latest stable QGC, the flight modes setup page only…
-
Implementing terrain upload for PX4, I came across 2 problems in QGC:
### Slow upload
The upload is extremely slow, it took about 30s for 20kb of data in SITL (!). Just removing the line
https://…
-
Steps to reproduce:
1. `./tools/configure.sh sim:citest`
2. `make menuconfig` -> select `CONFIG_LIBCXXABI=y` -> Save & Exit
3. `make -j8` ->
```
Create version.h
sed: 1: "/CONFIG_BASE_DEFCONFIG/…
-
I'm building a third party library against Nuttx export, with CONFIG_BUILD_KERNEL.
When building:
```c
int test(int fd) {
fd_set fds;
int r;
FD_ZERO(&fds);
FD_SET(fd, &fd…
-
## Describe the bug
When PX4 creates a dataman file on SD card, contents of this file is not cleared, but contains random data from deleted files on that disk.
This is because Nuttx is not fully com…
-
I tried to use sysytemview to reference the sim/segger configuration, but I didn't succeed, and the issue on systemview was also unsuccessful. I would like to know how to go about setting it up to use…
-
Execute the following code, wait fail with ret == -1 and errno == ECHILD.
```
int ret;
int pid = vfork();
if (pid == 0)
{
execlp("sh", "sh", "-c", "ls", NULL);
}
…
-
Greetings,
Is it possible to run a custom bash command to clear the workspace after dry-run?
I'm currently working with NuttX code-base and like how this plugin works!
However, after each dry-ru…
-
Rising-edge interrupts (at least) on `D00` do not fire. This is a problem on 1.0.2.0 but works fine on 1.0.0.0.
The app below shows it - the event handler never is called, and debug messaging in C…