-
**Describe the bug**
On Beta 7, after setting the left menu to auto hide, it will retract after clicking to access the Copy Address, Copy Account ID, etc menu causing it to float in mid air.
**To…
-
### Application Version
4.10
### Platform
windows 10
### Printer
creality ender 3 pro
### Reproduction steps
just tried to print the same way i always do and it wont retract
### Actual results…
-
Hi folks,
I have a big issue. I'm running dual E motors with a single nozzle (cyclops clone) and dual Z motors on a SKR 1.4 turbo, with five TMC5160 steppers, with a marlin bugfix 2.0.x SKR 1.4 FW.…
-
Hi,
This is a request for assistance and possibly a bug report. I'm still very new to Marlin and not sure where to look to debug this issue to help further. I'm hoping that the information provide…
-
Z CLEARANCE BETWEEN PROBES does not work with bltouch.
G28 works beautifully, G29 does not work.
The z axis does not move up, after the first measurement point.
``` cpp
#define BLTOUCH
#define Z_ENDS…
-
Any solution for this problem below?
after `G29` `#define Z_PROBE_END_SCRIPT` `m402` not working
``` cpp
15:29:41.580 : echo:Unknown command: "m402"
```
-
OK all Anyone have any ideas on what is going on. I have been working on getting a BLtouch working for about a week now and I haven't been able to get it working yet. i finally today got it to move up…
-
I have set SAFE_HOMING in Marlin 1.0.2.2 and set the position of the Z axis at the centre of the bed for safe homing. According to the description in the comments in Config,h SAFE_HOMING is supposed…
-
[klippy.log](https://github.com/KevinOConnor/klipper/files/4049682/klippy.log)
I'm including the log merely as a formality, as I don't expect it will help. However, I'm also including pictures wh…
-
So I recently built a Pegasus 12 by Makerfarm and decided to install Auto Bed Leveling using a micro switch and servo. I downloaded the current version of Marlin and have been editing ever since. Ho…