-
I have problem with this version while installing Arducam IMX519 also know as Arducam 16mp. It is possible to implement it in this version?
`
[ 14%] Building CXX object utils/CMakeFiles/jetson-utils.dir/logging.cpp.o
[ 14%] Building CXX object utils/CMakeFiles/jetson…
-
I am using the rosrun on Nvidia Ubuntu 14.04 platform and i have USB Camera ( UVC Complaint ), i ran the following,
roscore rosrun libuvc_camera camera_node
It worked fine, then i started installing…
-
Hi I've tried to install the camera driver for IMX327 to my Jetson nano, but keep running into this error.
make[2]: * No rule to make target 'arch/arm64/boot/dts/..//hardware/nvidia/platform/t210/p…
-
* **CPU**:
HMP Dual Denver 2/2 MB L2 +
Quad ARM® A57/2 MB L2
* **GPU**:
NVIDIA Pascal™, 256 CUDA cores
* **Memory**:
8 GB 128 bit LPDDR4
59.7 GB/s
* **Storage**:
32 GB eMMC, SDIO, SATA
…
-
print("没有符合条件的输出-2")
reg2 = re.compile(
r'RAM (\d+).+?CPU \[(.+?)\] EMC_FREQ (\d+)%@.+?GR3D_FREQ (\d+)% *')
However, now the tegrastat will also output the information of VDD and so…
-
Hi @D3-growe @D3-jwatts @D3-jwatts ,
This is regarding installation of Argus on Jetson Xavier AGX.
Can you confirm the below steps are correct to install Argus:
Step 1> Go to to Terminal.
S2>…
-
**Describe the bug**
Illegal instruction (core dumped) Occur on Jetson Nano with activated suspend mode.
**To Reproduce**
Steps to reproduce the behavior:
1.Follow the instructions on this sit…
-
1.从nvidia developer官网下载sdk manager；
2.安装dpkg -i sdkmanager_0.9.14-4964_amd64.deb
3.安装完后，目录位于/home/zhangshaoyan/nvidia/nvidia_sdk/JetPack_4.2_Linux_P3310
这是针对于Jetson Tx2的目录，其他的Tx1和AGX的目录是不一样的。
4.删除…
-
The software is able to run on Lenove Tablet whose processor architecture is x64. However, I wonder if it can run on platforms that use arm processor?
Specifically, I consider working with Nvidia Jes…