-
I'm very new in CNC and this whole stuff. I had the same issue as @peagerfw https://github.com/arkypita/LaserGRBL/issues/664 and changing steps to 1600 and limit max speed to 1125 actually work, but t…
-
Hi there,
I have a classic arduino+grbl 1.1 with a 20w laser on board.
Laser grbl 3.31 installed.
running the job when I unplug the alimentation of a fan extractor (on 220v)the machine stop and s…
-
@stefanbode
Is it possible to set up the shutter driver to work with the [Stepper Motor driver](https://github.com/arendst/Tasmota/wiki/A4988-Stepper-Motor-Controller)? The driver uses either a A…
-
## Problem description
Hello, I have a CNC 3018, and I keep getting "error while processing response".
On laptop i run ugs platform and I don't get the error it just stops moving, I have to discon…
-
### Description
Hello I have a DIY 3d printer which has E3d v6 hotend.. when I load file and give print in pronterface the printer starts but the hotend temperature never increase it simply fluct…
-
Hello all.
I'm having a really bizzare issue with my Re-ARM delta machine. During a print, seemingly randomly, my E stepper driver gets disabled. The motor just stops moving. M122 gives me E driver…
-
I'm finally getting my home built printer back into working order.
When I tried to do the linear advance calibration pattern I noticed that the X axis stepper was stopping during the slow speed t…
-
Bought the BIGTREETECH-SKR-PRO-V1.1 Board w/ TMC5160 ver1.3 Drivers.
I cant get it to work, i have tired everything , switching jumpers in SPI Mode or URTA, edited Marlin the Configuration.h , Confi…
-
Sir, I am a beginner to CNC machines. I made myself a CNC machine and need to use it as a plotter. I use Arduino Nano with V4 shield and A4988 drivers for NEMA 17 stepper motors.
I installed Arduino…
-
Dear Marlin Team,
I would like to request support for the TMC2130 drivers, which is implemented by @teemuatlut on his Marlin branch.
To do so, we need to have a SPI Library for the LPC MCU.
T…