-
- Two DNP notes but one component is marked as DNP in Altium
![Zrzut ekranu z 2019-05-06 13 57 38](https://user-images.githubusercontent.com/24512604/57223624-f25ff380-7006-11e9-9fec-8b4e1898f531.png…
-
Currently I am taking screenshots of the Assembly view and combine them to get a high resolution image which I then recolor and write a legend for.
I don't have to do that very often so it is not a…
atoav updated
5 years ago
-
This would eliminate the need for any manual data entry when uploading to Macrofab.com
-
Solder mask sliver constraint (IC4)
![drc_1_soldermask](https://user-images.githubusercontent.com/24512604/58158637-1cf2b300-7c7b-11e9-8448-b68e58a98195.PNG)
Rules:
- Disable silk to silk clearan…
-
Hi, thanks for this board, I think it will be very usefully for many project!
I'm considering building a couple of boards..
Do you have a BOM ready for the non-Altium users?
Also, looking at t…
-
### Description
PC_11 on CN11 should have been CN1 Nucleo-144 platform (for example [ST-Nucleo-F767ZI](https://os.mbed.com/platforms/ST-Nucleo-F767ZI/)) from looking at the mb1137 Altium project.
…
-
BOM for v1.4 has a few components with incorrect part numbers. These have been corrected during assembly but need to be folded back into the BOM (and Altium schematic too probably).
Incorrect parts…
-
I'm guessing this repo is curated to be public-facing and doesn't represent whatever internal version control is being used in active development? The real thrust of my question is whether it's worth …
-
The RF module boards don't have an altium project so it's hard to go between the schematics and layout. Can this be fixed???
-
Well In a complex scenario. The diagram becomes a complete mess. It gets to look like spaghetti with a lot of connections which are crossed the components. So it becomes really hard to work.
It wo…
pswin updated
5 years ago